Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateWhy Weston Homeowners Choose Genie Garage Door
We provide independent Genie garage door and opener service in Weston, FL: opener repair, opener installation, sensor calibration, spring repair and full door service. What sets our Genie work apart in Weston is that we diagnose by drive type and symptom rather than by a sales script, so an owner finds out whether they’re facing a simple sensor fix or a failed drive component before anyone touches the door.
Genie builds some of the most widely installed residential openers in South Florida, from older chain-drive units still bolting along in Bonaventure to current belt-drive and Wi-Fi-connected models. We work on them every week. To be clear and upfront: we’re not affiliated with, authorized by or endorsed by Genie. We’re an independent Genie service provider, and the local pro we connect you with is licensed and insured as Florida requires.
If your Genie won’t lift the door or refuses to close, call (833) 847-7527. We offer free estimates, upfront pricing, and a price that’s agreed before any work starts.
Why Trust Weston Garage Door Repair Pros for Your Genie Garage Door?
Our technicians have up to 15 years of experience, and Genie openers have been part of that work for as long as they’ve been on Weston walls. That matters because Genie has built the same basic families of drive systems for decades, and each one fails in its own recognizable way. A technician who knows the difference between a screw-drive coupler problem and a belt-drive tension problem will diagnose your door faster and charge you for the actual fault.
We use quality parts that fit Genie equipment: OEM gears, couplers, logic boards, Safe-T-Beam sensor pairs and remotes where the model is still supported, and quality aftermarket gears, rollers and belts when OEM is discontinued or priced out of proportion to the unit’s age. We don’t claim to stock Genie parts or to be a Genie dealer. What we do is fit the right part to your opener and reset it correctly.
Warranty-safe practice is a big part of that. On a Genie, the things most likely to cause trouble later are a travel limit that was set by feel rather than by the manual, a force setting pushed to compensate for a binding door, and a sensor pair that was never realigned after a track or hinge job. We test and set all three before we leave, so the next problem isn’t caused by the last repair.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Common Genie Garage Door Problems We Fix in Weston
Genie openers fail in patterns that track their drive type. Here’s what we see most often in Weston, and what usually causes it.
- Screw-drive trolley and coupler wear. The opener runs, but the door barely moves or stops mid-travel. Screw-drive units use a trolley and coupler that wear as they age; heat and humidity speed that up, and a door that moves in fits and starts is usually the first sign.
- Belt and chain tension problems, or a stripped carriage shoe. Grinding, a door that reverses after an inch, or a door that jerks when it starts. Belt and chain drives lose tension over time, and a carriage shoe that has worn out lets the arm slip instead of pulling the door smoothly.
- Logic board and travel-limit memory faults. Limits that won’t hold, or settings that reset themselves. South Florida power surges and lightning-season outages are the usual cause, and a board that keeps forgetting its limits needs replacement rather than another reset.
- Safety sensor misalignment and sun-baked sensor eyes. Phantom reversals and a door that refuses to close. West-facing garage openings get hammered by afternoon sun, and sensor eyes and brackets that have been cooked and knocked out of line are a common cause of a door that closes halfway and reverses.
- Remote and keypad pairing failures. A remote that works from one angle only, or a keypad that stops accepting codes. Usually a pairing and frequency issue rather than a dead board, which is why we check the remote and the receiver before quoting a replacement.
One more local reality: Weston’s 1990s doors often use torsion spring sizes that were standard then and are now obsolete. That’s a separate spring problem, but it’s worth knowing that a Genie opener struggling to lift a door is sometimes being asked to lift a door that’s binding on worn hinges or a tired spring. The opener isn’t always the fault.
Genie Parts & Our Repair-vs-Replace Approach
How we decide between repairing a Genie opener and replacing it comes down to three questions: how old the unit is, what’s actually failed, and whether the parts are still available at a sensible price.
Where the model is still supported, we’ll fit OEM Genie gears, couplers, logic boards, sensor pairs and remotes. Where it isn’t, we use quality aftermarket gears, rollers and belts that fit and hold up. What we won’t do is hide a bigger bill behind a small-sounding repair. On an opener that’s 15-plus years old and needs a board, a coupler and a gear set at once, we’ll tell you plainly that the repair may cost more than a new opener installed – and let you decide. That’s honest math, not an upsell.
If you want to know which side of that line your Genie falls on, call (833) 847-7527. Estimates are free, and the written estimate sets the final price.
Our Genie Service Process – Step by Step
- 1
Diagnosis. We check whether the opener is actually the fault or whether the door is binding. The first thing a good technician does is pull the emergency release and test the door by hand. If the door is heavy or sticks, the problem may be springs, hinges or tracks rather than the Genie unit.
- 2
Symptom-to-drive-type match. We match the symptom to the drive system: screw-drive trolley and coupler on a screw unit, belt tension or carriage shoe on a belt unit, limit memory and logic board after a power surge.
- 3
Repair or installation. We fit the failed part – coupler, gear set, belt, sensor pair or board – or, if the unit is past saving, we install a replacement opener matched to your door’s weight and headroom.
- 4
Reset and force-test. We reset travel limits, set force properly (never pushed to cover a binding door), and force-test the auto-reverse before we leave.
- 5
Warranty on the work. The parts we fit and the labor we do are backed, so if something isn’t right, you call and we come back.
That’s the full Genie service process for a Weston job, and it’s the same one whether it’s a quick sensor calibration or a full opener replacement.
See the difference
Before
After
Before
After
Before
AfterGenie Products We Service & Install in Weston
We service and install the full range of residential Genie equipment. That includes chain-drive units (the older, reliable workhorses still going strong in many Weston garages), belt-drive quiet openers that are common where a garage sits under or next to a bedroom, screw-drive fast-open units that are now aging in older Weston homes, and the current Wi-Fi-connected models with smartphone control and belt or chain drives.
What we work on most is Genie opener repair, opener installation, and sensor calibration. Sensor calibration in particular is often the whole job: a door that won’t close and reverses after a foot is usually a sensor problem, not a dead opener, and a realignment and re-test is quick work. We also install new Genie openers when an older unit is past the point of sensible repair, matched to your door and its headroom.
We Also Service These Brands
We’re not a single-brand shop. Alongside Genie, we work on LiftMaster and Chamberlain, plus Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors and openers. That breadth matters in a Weston garage where the door and the opener may not be the same brand, and it means one call covers diagnosis, repair and installation. There’s no need to call a second contractor for the door when the first one only handles the opener.
FAQs – Genie Garage Door Service in Weston
Is Weston Garage Door Repair Pros authorized by Genie? No. We’re an independent Genie service provider, not affiliated with, authorized by or endorsed by Genie. We work on Genie equipment the way we work on any brand we service, with quality parts that fit it and honest diagnosis.
Do you use quality parts that fit Genie equipment? Yes. We use OEM Genie parts where the model is still supported and quality aftermarket parts where OEM is discontinued or out of proportion to the unit’s age. We don’t claim to stock Genie parts or to be a Genie dealer – we source the right part for your opener.
How long does Genie service take? Most Genie opener repairs and sensor calibrations are done in one visit of roughly an hour to two hours, depending on the drive type and whether the door also needs attention. A full opener replacement takes longer, and we’ll give you a time estimate when we book. Call (833) 847-7527 for an exact quote.
What kinds of Genie products do you cover? Chain-drive, belt-drive and screw-drive residential openers, along with the doors and hardware they operate. We handle opener repair, opener installation, sensor calibration, spring repair and full door service in Weston.
Will service void my Genie warranty? Service by an independent provider doesn’t automatically void a Genie warranty, but warranty terms vary. We keep the work warranty-safe – correct parts, correct settings, no force pushed to hide a problem. If you’re unsure about your coverage, call us and we can talk it through before any work starts.
How much does Genie garage door cost in Weston? Typical estimated ranges for the work we do on Genie equipment in Weston:
| Service | Typical estimated range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Spring Repair (per spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
A matched pair of springs is usually replaced together, so a pair runs about twice the per-spring range. All prices are estimates, and the written estimate sets the final price. Call (833) 847-7527 for an exact quote – estimates are free.
My Genie door stops an inch off the floor or won’t close all the way – what causes that? That’s usually a safety sensor problem, not a dead opener: misaligned sensor eyes or brackets that have been knocked out of line, often by sun and heat on a west-facing opening. It can also be a travel limit that won’t hold after a power surge. Either way, it’s a quick diagnosis, and a sensor fix is far cheaper than a replacement. Call (833) 847-7527 and we’ll get it sorted.
Book Your Genie Service in Weston, FL
Whether your Genie needs a sensor calibration, a coupler replaced or a full opener installation, one call covers it. We offer emergency garage door service, free estimates, upfront pricing and a price agreed before any work starts. Call (833) 847-7527 to book your Genie garage door service in Weston.
Written by the team at Weston Garage Door Repair Pros.